Setting Up Weathervanes and Cupolas

Weathervanes are one of the most popular structures that you will find on most roofs across US. Along with the cupolas to be mounted on, weathervanes add a touch of American countryside tradition on the roofs of modern homes. Weathervanes and cupolas are both good ways of showing the balance of aesthetics and functionality.

In order to build your very own weathervanes and cupolas on your rooftop, you need first to set a ladder firmly next to the very spot on the roof where you will put the cupola. If you want to have your cupola just for the overall appearance of your house’s façade, mount the cupola in the part where it would be readily seen. On the other hand, if you want it as a holder for your weathervane, find the spot where there is the least obstruction from trees and other tall or wide objects.

Then, take the mounting tools, screws, marker, level, and a hand drill on the chosen spot where you will build the cupola. Typically, weathervanes and cupolas come with a kit and appropriate tools for installation.

Next, mark the exact location of the cupola with the marker and drill some holes for the screws to be driven into. You also have to check the alignment of the holes using the level to make sure that the cupola will be straight up when installed.

After doing so, drill holes on the marks using the hand drill. Make the holes slightly bigger than the screws to be used for erecting the cupola. When you are done with that, remove the drilling bit from you hand drill and attach the screwdriver head. Align the cupola on the drilled holes and screw it in place using the hand drill. Make it as tight as possible.

Lastly, attach the weathervane on the top of the cupola. Slide the weathervane pole on the appropriate slot on the mount of the cupola until it reaches the hit spot. Drive cross screws on it and tighten it manually to secure the pole and hold it in place. For further assistance on installation, you could inquire with Prairie Rose Country on some guidelines and tips for installing weathervanes and cupolas.